20
INSTALLATION / CIRCUIT LOADING
The messages displayed by the machine during operation are shown
on pg.27.
Check that all components
are correctly placed.
Move the ON/OFF switch to
"I" to turn on the machine.
Turn the knob clockwise to
terminate the circuit-load-
ing process.
Fill the coffee bean container
with coffee beans.
The machine is warming
Place a container beneath
up; lights are fl ashing.
the steam tube.
Remove the container.
Press the button.
When lights remain stead-
ily lit, the machine is ready
for use.
Important warning for using the "Aqua Prima Filter" can be found on
page 28.
The "Aqua Prima" fi lter can
Fill the tank with fresh drin-
be installed (see pg.26).
king water.
Press the button.
Turn the knob countercloc-
kwise to start loading the
circuit.
See rating plate
Insert the plug into a sui-
table electric socket.
Wait until a steady stream
of water fl ows out from the
nozzle.
Note: You must load the circuit before starting up the
machine for the fi rst time, if it has been inoperative for a
lengthy period or if the water tank has been completely
The circuit must be also loaded each time
emptied.
the light is steadily lit:
Check the dater on "Aqua Prima" fi lter; if fi lter is past its
date, replace it with a new one.