Roadstar HIF-1898D+BT Manual De Instrucciones página 12

7 English
DIRECT USB ENCODING
Remark:
Recording speed is 1:1.

No song title will be recorded during encoding mode.

To avoid damage to USB memory, remove it only when the radio is turned off.

ENCODE FROM DAB RADIO, PHONO, BLUETOOTH AND AUX-IN:
1. Plug the USB stick into the [USB PORT] (1);
2. Perform normal playback of the source you want to encode & record;
3. Press the [RECORD] button (5) twice to start encoding. On the display will flash
"USB";
4. Once the record is finished, press the [STOP] button (14) to stop recording.
ENCODE FROM CD:
1. Plug the USB stick into the [USB PORT] (1);
2. Perform normal playback of the CD you want to encode & record;
3. After focus search is completed, press the [RECORD] button (5);
4. Press repeatedly the [SKIP -/+] button (15/16) during the playback to select the
desired encoding option:

REC-1: Select to record only the current track;

REC-F: Select to record the whole folder;
 REC-A: Select to record all the tracks of the CD.
5. Press the [RECORD] button (5) to confirm;
6. The playback will stop and restart automatically and on the display (6) "REC" will
flash. Encoding is performing now;
7. Press the [STOP] button (14) to finish recording.
Note: After completing of encoding, unit will stop playback and encoding automati-
cally.
DELETE TRACKS FROM USB
1. Perform normal playback of the track you want to delete;
2. During playback of the track you want to delete, press the [DELETE] button (34)
on the remote control twice.