Looking After And Cleaning Your Machine; Cleaning Instructions - Brandt SLJ200 Manual De Instrucciones

3)

LOOKING AFTER AND CLEANING YOUR MACHINE

a)

Cleaning Instructions

1. Make sure that the motor has stopped completely and unplug the power cable from the
socket. Do not touch the power cable with wet hands.
2. Remove the bowl from the base.
3. Dismantle the parts as indicated below:
 Unlock the feed tube by turning it anti-clockwise.
 Remove the endless screw.
 Remove the filter and the basket.
4. Rinse each part using the cleaning brush. You can also wash them in soapy water.
Caution Never use a metal brush, abrasive cleaning products, aggressive detergents or pointed
cleaning tools. Do not wash the parts in the dishwasher.
5. Wipe the machine body with a soft,
6. After cleaning, allow the parts to dry in air and store them in a clean place with the lid on
the feed tube.
Caution Always wash the feed tube immediately after use. Otherwise the pulp and residues
may dry, which would make cleaning difficult. Poor cleaning can also cause reduced
performance of the machine.
BRANDT FRANCE - Simplified Joint Stock Company with capital of 1,000,000 Euros
89/91 Boulevard Franklin Roosevelt - 92854 Rueil-Malmaison (France)
damp cloth and then dry it carefully.
22