Initial Use; Settings; Setting The Time/Date - Beurer FT 58 Instrucciones De Uso

LCD display
1
2 3 4
12
E
11
10
9

5. Initial use

The batteries are already inserted in new de­
vices. Before first use, remove the protrud­
ing plastic insulating strip from the battery
compartment. The ear thermometer will then
switch on automatically.

6. Settings

6.1 Setting the time/date

Before beginning to take measurements, we recommend that you
set the current time and date. This will allow you to organise the
saved measurements more easily later.
1 Room temperature mode
2 Displays room temperature/
time/date
5
6 3 AM/PM display (time)
7
4 Battery symbol
8
5 Memory mode
6 No fever symbol
7 Temperature unit (°C or °F)
8 Fever symbol
9 Temperature display
10 Object temperature mode
11 Protective cap symbol
12 Body temperature mode
1. Press and hold the ON/OFF but­
ton on the switched­off de­
vice for three seconds. "24 H"
appears on the display.
2. Use the START button to select
the hour format (12h or 24h) and
confirm using the ON/OFF but­
ton .
3. The hour setting appears on the
display. Use the START button to
select the current hour and con­
firm using the ON/OFF button
4. The minute setting appears on
the display. Use the START but­
ton to select the current minute
and confirm using the ON/OFF
button .
5. The year setting appears on the
display. Use the START button to
select the current year and con­
firm using the ON/OFF button
6. The day flashes on the display.
Use the START button to select
the current day and confirm us­
ing the ON/OFF button
19
.
.
.