GE PP989 Manual Del Propietario E Instrucciones De Instalación página 11

Cleaning the glass cooktop.
Clean your cooktop
after each spill. use
CeRAmA BRyTe Ceramic
®
Cooktop Cleaner.
Use a CERAMA BRYTE Cleaning
®
Pad for Ceramic Cooktops or a
Scotch-Brite Multi-Purpose No
®
Scratch blue scrub pad .
The CERAMA BRYTE Ceramic
®
Cooktop Scraper and all
recommended supplies are
available through our Parts
Center . See instructions under "To
Order Parts" section on next page .
NoTe: Do not use a dull or nicked
blade .
Normal Daily Use Cleaning
oNly use CERAMA BRYTE
®
Cleaner on the glass cooktop . Other creams
may not be as effective .
To maintain and protect the surface of your
glass cooktop, follow these steps:
Before using the cooktop for the
first time, clean it with CERAMA BRYTE
Ceramic Cooktop Cleaner . This helps
protect the top and makes clean-up
easier .
Daily use of CERAMA BRYTE
Cooktop Cleaner will help keep the
cooktop looking new .
Burned-On Residue
WARNING:
glass surface may occur if you use scrub
pads other than the pad included
with your cooktop.
Allow the cooktop to cool .
Spread a few drops of CERAMA BRYTE
Ceramic Cooktop Cleaner to the entire
burned residue area .
Using the included CERAMA BRYTE
Cleaning Pad for Ceramic Cooktops, rub
the residue area, applying pressure as
needed .
heavy, Burned-On Residue
Allow the cooktop to cool .
Use a single-edge razor blade scraper
at approximately a 45° angle against
the glass surface and scrape the soil . It
will be necessary to apply pressure to
the razor scraper in order to remove
the residue .
Ceramic Cooktop
®
Ceramic
®
NOTE: It is very important that you DO NOT
heat the cooktop until it has been cleaned
thoroughly.
DAMAGE to your
®
®
GEAppliances.com
Shake the cleaning cream well .
Apply a few drops of CERAMA
BRYTE Ceramic Cooktop Cleaner directly
®
to the cooktop .
Use a paper towel or CERAMA
BRYTE Cleaning Pad for Ceramic
®
Cooktops to clean the entire cooktop
surface .
Use a dry cloth or paper towel
to remove all cleaning residue .
No need to rinse .
If any residue remains, repeat the steps
listed above as needed .
For additional protection, after all
residue has been removed, polish the
entire surface with CERAMA BRYTE
Ceramic Cooktop Cleaner and a paper
towel .
After scraping with the razor
scraper, spread a few drops of
CERAMA BRYTE Ceramic Cooktop Cleaner
®
to the entire burned residue area . Use the
CERAMA BRYTE Cleaning Pad to
®
remove any remaining residue .
For additional protection, after all
residue has been removed, polish the
entire surface with CERAMA BRYTE
Ceramic Cooktop Cleaner and a paper
towel .
®
®
11