Troubleshooting; Technical Data - Farberware M3481RBR Instrucciones De Operación

TROUBLESHOOTING

Problem Cause
The Appliance not plugged in
appliance is
not working Wall outlet not energized
Malfunctioning appliance
Overheated motor
The head Foreign item blocking the
cannot be head/base hinge
fully pushed
down/cannot
lock
Rotating Misaligned drive shaft
attachment
touches the
bowl during
operation
Drive shaft Too much food in
rotates very the bowl / Motor is
slowly or overloaded
does not
rotate
If additional assistance is needed, please contact our Customer Assistance at
1-855-451-2897 (US).
Rated voltage:
Stand Mixer_HA-3481RB_IM_US_V9_171220.indd 12

TECHNICAL DATA

120V ~ 60Hz
12
Solution
Insert the plug into the wall outlet
Check fuses and circuit breaker
Set the speed control knob to the 0
position, unplug the appliance from
the wall outlet and contact qualified
personnel to check and repair the
appliance
Set the speed control knob to the 0
position, unplug the appliance from
the wall outlet and allow the appliance
to cool down for at least 20 minutes.
Restart cycle
Remove item from the hinge.
If the problem persists, do not use
the appliance and contact qualified
personnel to check and repair the
appliance
Set the speed control knob to the 0
position, unplug the appliance from
the wall outlet and contact qualified
personnel to check and repair the
appliance
Remove the bowl from the clamping
plate. Remove some food, shake the
bowl to redistribute the ingredients
and then restart cycle. Turn and
hold the speed control knob
counterclockwise to the P position for
a few seconds and then release it in
order to break up large parts. Repeat
until desired result is reached
Rated power input: 600W MAX.
12/20/17 4:51 PM
I
N
f
a
M
C
K
T
W
•
F
•
W
•
•
H
•
•
•
W
•
•
•