RIDGID HD16000 Manual Del Usuario página 14

OPERATION
Using the Detachable Blower
for "Blowing"
Two suggested methods of using the
Blower are:
1. Insert the round end of the Blower
Wand into the Blowing Port of the
Detachable Blower and turn clockwise
to lock.
2. The Wet/Dry Vac may also be used
for blowing using the seven-foot Hose
supplied with the Wet/Dry Vac. Install
the Push Button end of the Vac Hose
in the Blowing Port of the Detachable
Blower. For added control, an Extension
Wand and/or Car Nozzle can be added
to the opposite end of the Hose. The
unit is ready for blowing applications.
3. Turn the Blower "ON" by sliding the
Switch in the Handle of the Blower to
SP7037ESF.indb 14
Goggles
Dusk Mask
Detachable
Blower Port
TURN CLOCKWISE
TO LOCK
Blower
Wand
- OR -
the "I" position.
"ON"
Switch
Detachable
Blower Handle
14
Hose
Car
Nozzle
Detachable
Blower Port
"OFF"
8/2/18 9:14 AM