Measuring Station; Base Station - Hama EWS-810 Instrucciones De Uso

Warning – Batteries
• Immediately remove and dispose of dead batteries from the product.
• Only use batteries (or rechargeable batteries) that match the speci ed type.
• Do not mix old and new batteries or batteries of a different type or make.
• When inserting batteries, note the correct polarity (+ and - markings) and insert the
batteries accordingly. Failure to do so could result in the batteries leaking or exploding.
• Do not charge batteries.
• Keep batteries out of the reach of children.
• Do not short circuit the batteries/rechargeable batteries and keep them away from
uncoated metal objects.
4. Getting Started

4.1. Measuring station

• Open the battery compartment (26) and insert two AAA batteries with the correct polarity.
• Press the CH-/TX button (23) repeatedly to select the channel the measuring station is to
use for transmission. CH1, CH2 or CH3 is shown on the display.
• Press the °C/°F button (25) to choose between °C and °F for the temperature display.
• Close the battery compartment.
Note
Before use, ensure you insert the batteries in the measuring station rst and then in the

base station.

4.2. Base station
• Open the battery compartment (20) and insert two AAA batteries with the correct polarity.
Close the battery compartment.
4