Measuring Station; Replacing The Batteries - Hama Color EWS-1400 Instrucciones De Uso

• Press the °C/°F button (30) to choose between °C
and °F for the temperature display.
• Then close the battery compartment cover.
Note
Before use, ensure you insert the batteries in
the measuring station first and then in the base
station.
Base station
• Remove the screen protector from the display.
• Plug the power supply connection cable into the
socket (23) on the base station. Switch the base
station on by plugging the power supply unit into
a power outlet approved for this purpose. The
socket must be close to the base station and easily
accessible.
• Alternatively, open the battery compartment (25)
and remove the contact breaker. Close the battery
compartment cover (25).
Note
If the batteries are inserted correctly and you
connect the power supply unit to the station,
the base station will automatically switch to the
external power supply.

4.2. Replacing the batteries

Note – Replacing the batteries
• Note that the stations have to be
resynchronised each time after you change the
batteries in the measuring or base station.
• To do this, remove the batteries from the other
station and then reinsert them, or change them
as required.
4
All manuals and user guides at all-guides.com

Measuring station

• When the
• Open the battery compartment (31), remove and
Base station
• When the
• Open the battery compartment (25), remove and
5. Installation
symbol appears (next to the outdoor
humidity(16)), replace the 2 AAA batteries for the
measuring station with 2 new ones.
properly dispose of the depleted batteries, and
insert two new AAA batteries with the correct
polarity. Then close the battery compartment cover.
symbol appears (next to the outdoor
humidity (5)), replace the 2 AA batteries for the
measuring station with 2 new ones.
properly dispose of the dead batteries and insert
two new AA batteries with the correct polarity.
Then close the battery compartment cover (25).
Note – Installation
• We recommend initially placing the base and
measuring stations in the intended locations
without installing them and making all the
settings described in 6. Operation – to do.
• Only install the stations once the appropriate
settings have been made and a stable wireless
connection is established.