Hedge Trimmer - Sears Craftsman 358.791170 Manual De Uso

• The blade continues to spin after the
throttle is released or engine is turned
off. The coasting blade can throw ob-
jects or seriously cut you if accidental-
ly touched. Stop the blade by contact-
ing the right hand side of the coasting
blade with material already cut.
Stop coasting
bJ_debycontact , _
,_ WARNING: Inspect the area to
be cut before each use. Remove ob-
jects (rocks, broken glass, nails, wire,
etc.) which can be thrown or become
entangled in the blade or trimmer line.
• Throw away and replace blades that
are bent, warped, cracked, broken
or damaged in any other way.
• Install required shield properly be-
fore using the unit. Use the metal
shield for all metal blade use.
_ILWARNING: Only use brushcut-
ter attachments that provide a metal
shield with protruding nose.
Protrud ing
• Use only specified blade and make
sure it is properly installed and se-
curely fastened.
• Cut from your left to your right.
• Always use the handlebar and a
properly adjusted shoulder strap
with blade (see ASSEMBLY instruc-
tions in brushcutter attachment
operator's manual).
CULTIVATOR SAFETY
_IkWARNING: Rotating tines can
cause serious injury. Keep away from
rotating tines. Stop the engine and
disconnect the spark plug before un-
clogging tines or making repairs.
,_ WARNING: Inspect the area to
be cultivated before starting the unit.
Remove all debris and hard and sharp
objects such as rocks, vines, branch-
es, rope, string, etc.
• Avoid heavy contact with solid objects
that might stop the tines. If heavy con-
tact occurs, stop the engine and in-
spect the unit for damage.
• Never operate the cultivator without
the tine cover in place and properly
secured.
• Keep the tines and guard clear of
debris.
• After striking a foreign object, stop
the engine, disconnect the spark
plug and inspect the cultivator for
damage. Repair before restarting.
• Disconnect attachment from the drive
engine before cleaning the tines with
a hose and water to remove any
build-up. Oil the tines to prevent rust.
• Always wear gloves when servicing or
cleaning the tines. The tines become
very sharp from use.
• Do not run unit at high speed unless
cultivating.
HEDGE TRIMMER SAFETY
DANGER: RISK OF CUT; KEEP
HANDS AWAY FROM BLADE - Blade
moves momentarily after the trigger is
released. Do not attempt to clear
away cut material when the blade is in
motion. Make sure engine is stopped,
the spark plug wire is disconnected,
and the blade has stopped moving
before removing jammed material
from the cutting blade. Do not grab or
hold the unit by the cutting blade.
'D ®
I_IIIIIAAAAI_
I............ !