Section Vii. Buttonhole Automatic Buttonhole; Preparation For Sewing; To Sew - Sears Kenmore 385.15518000 Manual De Instrucciones

SECTION VII. BUTTONHOLE
Automatic Buttonhole
(D Stitch selector:
(_ Stitch length:
1_ Needle thread tension:
(_ Presser foot:
I] (BH)
Blue zone
2to6
Automatic buttonhole foot
• Preparation for sewing
(_ Groove
Pin
Attach the automatic buttonhole fool Make sure the
groove on the holder catches the pin on the foot when
lowering the presser foot,,
.
f
©
PATTERN_
®
LENGTH
®
.J
= To sew
(D Button holder
(_) Buttonhole lever
The buttonhole size is automatically set by placing the
button in the rear of the automatic buttonhole foot,
The button holder on the foot takes a button up to 1 .,0"
(2 5 cm) in diameter,
Make a test buttonhole on an extra piece of the fabric to
check your settings,
Use interfacing on stretch fabrics,
Pull the button holderOto the back. and place the button
in it, Push it together tightly on the button.
Pull the buttonhole lever (_)down as far as it will go.
\
62