JVC KW-XR610 Manual De Instrucciones página 38

Disc cannot be played back.
Noise is generated.
A longer readout time is
required ("READING" keeps
flashing on the display).
Tracks do not play back in
the order you have intended
them to play.
The elapsed playing time is
not correct.
"NO FILE" appears on the
display.
"NOT SUPPORT" appears on
the display and track skips.
The correct characters are
not displayed (e.g. album
name).
Noise is generated.
"READING" keeps flashing on
the display.
"NO FILE" appears on the
display.
"NOT SUPPORT" appears on
the display and track skips.
Tracks/folders are not played
back in the order you have
intended.
* 1 Folder that is physically empty or folder that contains data but does not contain valid MP3/WMA
track.
38 ENGLISH
Symptom
• Use a disc with MP3/WMA tracks recorded in a format
• Add the extension code <.mp3> or <.wma> to the file
Skip to another track or change the disc. (Do not add the
extension code <.mp3> or <.wma> to non-MP3 or WMA
tracks.)
Do not use too many hierarchical levels and folders.
The playback order is determined when the files are
recorded.
This sometimes occurs during playback. This is caused by
how the tracks are recorded on the disc.
Selected folder is an empty folder *
that contains MP3/WMA tracks.
Skip to the next track encoded in an appropriate format or
to the next non-copy-protected WMA track.
This unit can only display letters (upper case), numbers,
and a limited number of symbols. (
Check whether the selected folder, the connected USB
device, or the iPod/iPhone contains a playable file.
Skip to the next track encoded in an appropriate format or
to the next non-copy-protected WMA track.
Remedy/Cause
compliant with ISO 9660 Level 1, Level 2, Romeo, or Joliet.
names.
The track played back is not an MP3/WMA track. Skip to
another file. (Do not add the extension code <.mp3> or
<.wma> to non-MP3 or WMA tracks.)
• Readout time varies depending on the USB device.
• Do not use too many hierarchy or folders.
• Turn off the power then on again.
• Reattach the USB device again.
The playback order is determined by the write-in time
stamp. The first track/folder written into the USB device
will be the first track/folder for playback.
1 . Select another folder
9)