JVC KD-X362BT Manual De Instrucciones página 22

BLUETOOTH®
[VOICE] Speak the name of the contact you want to call or the voice command to
control the phone functions. (See "Make a call using voice recognition".)
Make a call using voice recognition
1
Press and hold to activate the connected phone.
2
Speak the name of the contact you want to call or the voice command
to control the phone functions.
• Supported Voice Recognition features vary for each phone. Refer to the
instruction manual of the connected phone for details.
Settings in memory
Store a contact in memory
You can store up to 6 contacts into the number buttons (1 to 6).
1 Press to enter Bluetooth mode.
2 Perform 'Select an item (page 3 or 4)' operation to select
[RECENT CALL], [PHONEBOOK] or [DIAL NUMBER].
3
Perform 'Select an item (page 3 or 4)' operation to select a
contact or enter a phone number.
If a contact is selected, press the following to show the phone number.
KD-X362BT: Volume knob
KD-X361BT: * ENTER
4
Press and hold one of the number buttons (1 to 6).
"MEMORY P(selected preset number)" appears when the contact is
stored.
To erase a contact from the preset memory, select [DIAL NUMBER] in step 2
and store a blank number.
16
ENGLISH
Make a call from memory
1
Press to enter Bluetooth mode.
2
Press one of the number buttons (1 to 6).
3
Press the following to call.
KD-X362BT: Volume knob
KD-X361BT: * ENTER
"NO PRESET" appears if there is no contact stored.
Bluetooth mode settings
1
Press and hold .
2 Perform 'Select an item (page 3 or 4)' operation to select an
item (see the following table).
3 Repeat step 2 until the desired item is selected/activated or follow the
instructions stated on the selected item.
4
Press to exit.
To return to the previous setting item, press
[BT MODE]
[PHONE SELECT]* Selects the phone or audio device to connect or disconnect.
" " appears in front of the device name when connected.
[AUDIO SELECT]*
" " appears in front of the current playback audio device.
[DEVICE DELETE] 1 Perform 'Select an item (page 3 or 4)' operation to select a device
to delete.
2 Perform 'Select an item (page 3 or 4)' operation to select [YES] or
[NO].
* You can connect a maximum of two Bluetooth phones and one Bluetooth audio device at a time.
.
Default: [XX]