JVC KD-X362BT Manual De Instrucciones página 36

TROUBLESHOOTING
Symptom
"UNSUPPORTED DEVICE" • Check whether the connected USB device is compatible
appears.
• Reattach the USB device.
"UNRESPONSIVE DEVICE"
appears.
"USB HUB IS NOT
SUPPORTED" appears.
"CANNOT PLAY" appears.
• The source does not
change to "USB" when
you connect a USB device
while listening to another
source.
• "USB ERROR" appears
The iPod/iPhone does not • Check the connection between this unit and iPod/iPhone.
turn on or does not work. • Disconnect and reset the iPod/iPhone using hard reset.
"LOADING" appears when
you enter search mode by
pressing .
"NO DEVICE"
30
ENGLISH
Remedy
with this unit and ensure the file systems are in
supported formats. (Page 27)
Make sure the USB device is not malfunction and reattach
the USB device.
This unit cannot support a USB device connected via a
USB hub.
Connect a USB device that contains playable audio files.
The USB port is drawing more power than the design
limit. Turn the power off and unplug the USB device.
Then, turn on the power and reattach the USB device.
If this does not solve the problem, turn the power off and
on (or reset the unit) before replacing with another USB
device.
This unit is still preparing the iPod/iPhone music list. It
may take some time to load, try again later.
Connect a device (USB/iPod/iPhone), and change the
source to USB/iPod/iPhone again.
Symptom Remedy
• Sound cannot be heard • Reconnect the Android device.
during playback. • Launch any media player application on the Android
• Sound output only from device and start playback.
the Android device. • Relaunch the current media player application or use
another media player application.
• Restart the Android device.
• If this does not solve the problem, the connected Android
device is unable to route the audio signal to unit.
(Page 28)
• If USB connection does not work, connect the Android
device via Bluetooth or through auxiliary input jack.
"NO DEVICE" or "READING" • Reconnect the Android device.
keeps flashing. • If USB connection does not work, connect the Android
device via Bluetooth or through auxiliary input jack.
Playback is intermittent or Turn off the power saving mode on the Android device.
sound skips.
"CANNOT PLAY" • Make sure Android device contains playable audio files.
• Reconnect the Android device.
• Restart the Android device.
"DISCONNECTED" USB is disconnected from the head unit. Please make sure
the device is connected properly through USB.
"CONNECTING" • Connected via USB input terminal: The device is
connecting to the head unit. Please wait.
• Connected via Bluetooth: The Bluetooth is disconnected.
Please check Bluetooth connection and make sure both
the device and unit are paired and connected.