PNI SAFEHOUSE HS550 Manual De Usuario página 12

EN
3. FIRST USAGE
3.1 Set up
With the built-in WiFi Communications module, if your system is equipped to report
alarms and Remote Access via Mobile APP over the internet, your router must remain
powered-on at all times, and a WiFi internet connection is required.
With the built-in GSM/3G Communications module, if your system is equipped to
report alarms and Remote control via SMS or Voice Dialling, to ensure the SIM card is
installed (refer to the diagram below ) and the panel must be connected to the GSM/3G
Cellular or to the Internet.
AC Power Connections - Connect the Power Supply to the DC 5V micro USB port,
and push the backup battery switch to "ON".
3.1.1 Quick guide : Wifi internet configuration and adding system to mobile app
Scan the QR code on the box with your smart phone to download and install the
Easy Security app from the Play Store (Android) or App Store (iOS).
The Easy Security app has an intuitive menu that will guide you through Wifi
Configuration / Internet connection as follows:
1. Open app and create an account (click on "Register" button) using your email
address and a secret password, in order to use the application. Follow the on-screen
steps to complete the account validation.
2. After activating the account, use the authentication data to access the application
(e-mail and password);
3. To add PNI Safe House HS550 alarm system to your mobile app, you must connect
the it to a wireless / WiFi network available at that location;
4. Connect your smartphone to the wireless network with internet access;
5. Access the dedicated application and press the + button;
6. Choose the option: Airlink and follow the directions on the screen;
12