PNI SAFEHOUSE HS550 Manual De Usuario página 17

5. REMOTE SMS
5.1 How to set the parameters via SMS
To set the parameters via SMS, editing the setting text message as below, then send
it to the SIM number installed in the alarm system panel. Your mobile will received an
acknowledgement SMS if setting ok.
* System Password
Note: The command must be 2 digits( e.g.,01,90,etc. ), and the header,
separator and ending character must be'*'.
Command Function
51 1st Phone Number
52 2st Phone Number
53 3st Phone Number
54 4st Phone Number
55 5st Phone Number
90 the server IP address and
Port
92 the GPRS APN
Note:
The examples uses the default system password 6666.
1. The Phone Number setting format of remote text message: 07xxxxxxxx,A,B
In this string: "07xxxxxxxx" is the phone number( up to 18 digits ),
- "A" used to Enable(1) or Disable(0) the Alarm Voice Dialling and
- "B" used to Enable(1) or Disable(0) the Alarm SMS notification.
For example:
To set the 1st Phone Number as "0710123456" and enable the SMS notification only,
and to set 2nd Phone Number as "0720654321" and enable the Voice Dialling only,
then the remote SMS to be send is:
*6666*510710123456,0,1*520720654321,1,0*.
2. The server IP address and Port is only used for service remote connection.
The server IP and Port setting format of remote text message: aaa,bbb,ccc,ddd,xxxxx
In this string, "aaa,bbb,ccc,ddd" is the IP and "xxxxx" is Port.
For example:
To set the IP and Port as "116.62.42.223:2001", then the remote SMS is
*6666*90116,62,42,223,2001*.
3. Setting the operator Access Point Name . This is also used for service remote
connection.
For example:
* Command1 Parameter1 * Command2
Description
refer to note 1
refer to note 1
refer to note 1
refer to note 1
refer to note 1
Only used for GPRS
network, refer to note 2
Only used for GPRS
network, refer to note 3
17
Parameter2 * ..................
Factory
Defaults
Null
Null
Null
Null
Null
Null
CMNET
EN