Getting Started; Step 1: Installing The Pads; Step 2: Choosing The Space On The Roof; Step 3: Applying The Sealant - STANLine BOX 4G Manual Del Usuario

EN

Getting started

Your terminal can be installed in 12 steps:
Installing the pads
4 pads are supplied with the Box 4G
to attach it to the roof of your vehicle.
Screw each of the 4 pads to the Box
using the 3 M4 inserts.
Choosing the space on the roof
Pick a flat, bare space on the roof of the
RV. Avoid placing the system near the
metal parts.
Applying the sealant
Recommended sealant to stick the Box
on top of the vehicle: Teroson MS 930.
Apply the sealant evenly to the inner side
(ribbed) of the 4 pads.
6
STEPS
1
2
3