Adjusting The Power Cord Length; Setting The Clock - Oster BVSTDCDW12B Manual De Instrucciones

PREPAR I N G F O R FIRST TIM E US E

ADJUSTING THE POWER CORD LENGTH

You can customize the length of the power cord so that it is
the exact length you desire.
To increase the length of the power cord: Grasp the power
cord (not the power plug) and gently lift it out of the slot,
then feed it into the coffee maker. Lock the cord in the slot
when finished.
To decrease the length of the power cord: Grasp the power
cord, lift it out of the slot, then feed it into the coffee maker.
Lock the cord in the slot when finished. See Figure 1.

SETTING THE CLOCK

(Models BVSTDCDWX20B and BVSTDCDWX20R only)
The clock flashes on the control panel to indicate that it has not been set.
NOTE: You must set the clock if you want to use the Delay Brew feature.
To set the clock:
1. Press and hold the "Hora" button until the clock displays
the correct hour. See Figure 2.
The PM indicator will light to indicate a PM time; if the
PM indicator light is not lit, the time is AM.
2. Press and hold the "Min." button until the clock displays
the correct minute. See Figure 3.
The clock is now set.
En g lish -5
Figure 1
Figure 2
Figure 3