FLYING INSECT KILLER 20 m
Instruction manual
Art.-No. 62306
Dear client,
thank you for choosing one of our quality products. In the
following, we will explain the functions and operation of our
product. Please take the time to read through the instruc-
tions carefully. Please take some time to read through the
instructions carefully. Please note all the included safety and
operating instructions. Keep this manual safe and ensure
that you include it when passing on the product on to a third
party. If you have any questions or suggestions about this
product, please contact your supplier or our service team.
We would appreciate it if you would recommend us to others,
and we hope you enjoy using this unit.
1. Scope of delivery
• Electronic flying insect killer with mounting ring and mains
cable
• Instruction manual
2. Connecting to the mains net work
The device was designed for an operating voltage of ~230
volt. Before you connect the mains plug to the outlet in your
home, please confirm that the operating voltage in your
home corresponds to this voltage.
3. Putting into operation
1. It is recommended to hang up the device 1.5 to 3 metres
above the ground. The blue lamp attracts flying insects.
Do not hang up the device too close to other light sour-
ces. Generally, the darkest place in the room that is to be
protected is the best. When hanging up the device, keep a
certain distance to persons and foodstuff in order to avoid
the insects coming too near to you. When using the device,
close windows and doors if possible.
2. Do not hang up the device in front of an open window or an
open door as the insects do not stay in draught areas.
6
2
4. Turning on the device
After connecting the mains plug to the mains network in your
home, press the "ON" switch to turn on the device.
5. Safety instructions
• For safety and certification reasons (CE) the unauthorised
conversion and / or modification of the product is not
permitted. This will void the warranty / guarantee.
• Ensure that you perform a proper start-up of the device.
Please observe these operating instructions.
• Repairs or other works, e.g. changing a UV tube etc. may
only be carried out by a specialist.
• Only operate the unit with the designated voltage.
• If the unit, the AC adapter or its connecting cable is da-
maged, do not touch it. First, turn off the corresponding
mains socket (e.g. via the respective circuit breaker) and
remove the power plug from the power outlet. Do not
continue to operate the product, but take it to a specialist
workshop.
• Never use the device for other purposes.
• Do not use the device in places with flammable materials
or explosive gases and dust such as barns or stables The
device is also not suitable for use for commercial purposes.
• Only use the device indoors! In outdoor areas, insects fal-
ling under nature and species protection can be killed by
the device.
• The product must not get damp or wet. To avoid the risk of
fire or electric shock, we ask you ensure that the device and
its power supply do not come into contact with dripping or
splashing water, rain or moisture.
• Do not put any objects filled with liquid, such as buckets,
vases or plants, in the immediate vicinity of the product
or the power supply. Liquid could enter into the housing
interior. This could not only cause damage to the device,
but could also result in a fire hazard.
• Ensure sufficient ventilation of the device during operati-
on. Do not cover it with objects such as magazines, table-
cloths or curtains.
• Do not put any ignition sources, such as lit candles, on the
device or power supply or in the vicinity of these objects.
Status: 01/17