BUTTONS
Lock Releases / Call Guard Unit Button.
· While in conversation with the Street Panel (only audio, only video or
audio + video), pressing it will activate the open door lock-release.
· Pressing this button whilst the monitor is on standby will result in a call being
made to the guard unit (where one exists).
Auto-start button.
Connection with the Block's or General Entrance's camera (depending on
availability in the installation, see chapter Operations: Auto-start).
Auxiliary F1 function.
F1
The F1 button and F1 terminal have the option of being confi gured. You can
select between Sending a negative (negative out through F1 terminal upon
pressing the F1 button) and Panic call to guard unit (send a command). It is
initially confi gured, by default, as an output and sends a negative "-".
Audio Button.
When a call is received, press this button to speak to the visitor. The audio
channel is opened from street entrance to residence, (the blue led lights up
indicating a conversation with the street entrance, and everything said will
be heard by it), this is in hands-free operating mode. Press to complete the
communication, (upon completion the blue led audio light back off and the red
led turns on).
Button Menu.
·
With the monitor on standby, press and hold this button for 1 seconds to go
into User confi guration mode. (See chapter Programming: User Menu)
· To access the:
- When the monitor is not programmed, it accesses the Administrator Menu.
From this menu, you can program the monitor according to your installation
needs
- Once the monitor is programmed, it accesses the User Menu. From this
menu, you can access the user's settings to personalise them.
LEDs
Red LED.
On. Standby monitor.
Intermittent. Indicates that the do not disturb function is activated.
Blue Led:
Intermittent. Monitor not programmed (standby).
On. Conversation in hands free audio model.
On/Blinking. Conversation in simplex audio mode
Green LED: According to confi guration.
8
DUOX VEO XS MONITOR