System Settings - Lenco PDR-030 Manual Del Usuario

Playing stations saved as presets
To play a preset station:
Select the band (DAB+ or FM) of the station by pressing the Standby/Mode button.
Press the Preset button to recall the preset station, then using the PREV or NEXT buttons to browse
through your presets and press the Select/Snooze button to confirm
Setting the time automatically
When you first turn on the radio it will automatically synchronise to the local time while searching
for DAB+ stations. If the time hasn't set itself try to change the location of the device for a better
signal.

System Settings

With the unit on, press and hold the INFO/MENU button. This will open the "Set Menu".
Press the PREV or NEXT buttons to select your desired Sub-option.
Setting the Time/Date
Press and hold Info/Menu button, the <Time/Date> will be shown on screen, press Select/Snooze
button to enter time setting mode.
The hours will flash. Press the Prev or Next button ro set the hour. Press the Select/Snooze button to
confirm.
Repeat the last two steps to set the minutes, year, month and date.
System Version
You can check the software version number by pressing and holding the Info/Menu button. Press
the Prev or Next button until <System Version> is shown on the screen, press the Select/Snooze
button to confirm.
Resetting the radio
Resetting the radio will delete all the tuned DAB+ stations and all the preset memory stations in FM
and DAB+ modes. To reset the radio:
Press and hold the INFO/MENU button.
Press the Prev or Next button until <Factory Reset> is shown on screen, press the Select/Snooze
button and <Yes> or <No> is shown on the screen. Use Prev or Next button to select <Yes>.
Press the SELECT button and radio will be reset.
Sleep setting
Press and hold the Alarm/Sleep button.
Press the PREV or NEXT button to select either OFF-120-90-60-45-30-15-5 minutes.
Press the SELECT button to confirm.
6