Operation - Fagor IO-MWS-0473 Manual De Instrucciones

OPERATION

This microwave oven has a modern electronic programmer to
adjust the parameters of cooking or reheating.
1. Setting current time
Once the microwave oven is plugged into the outlet, the display
shows 00:00. Proceed as follows:
1. Press minute digits start to flash
2. Turn to set the hour
3. Press minute digits start to flash
4. Turn to set the minutes
5. Press to store current time setting
Current time must be set so that all oven functions are available. Current time must
be stored. If this is not done within 5 minutes, previous time setting will be restored.
2. Heating food
Example: If you want to cook food for 20 minutes using 80% of
maximum microwave power, the oven can be set as follows:
1. Press , the screen displays „PI 00".
2. Press
80%, the display will show „P80" (the microwave power is marked
with the appropriate symbol shown in the table on the next page).
3. Press
4. Turn to select the cook time of 20 minutes
5. Press
Note: Time can be adjusted with different resolution for individual
cook
time ranges:
0---1 min:
1---5 min:
5---10 min:
10---30 min: 1 minute
30---95 min: 5 minutes
Symbols corresponding to the cooking power:
62
repeatedly or turn
to confirm.
to start heating or
5 seconds
10 seconds
30 seconds
, to set microwave power equal to
to cancel settings