MOUNTING
ADJUST SCREW A
SCREW B
TRIM-KIT PLASTIC
COVER
Electrical connection
The oven is fitted with a plug and must be only connected to a properly installed
earthed socket. In accordance with the appropriate regulations, the socket must
only be installed and the connecting cable must only be replaced by a qualified
electrician. If the plug is no longer accessible following installation and all-pole iso-
lating switch must be present on the installation side with a contact gap of at least
3mm.
Built-in furniture
The built-in cabinet shall not have a rear wall behind the appliance. Minimum
installation height is 85cm. Do not cover ventilation slots and air intake points.
68
340