Features Of The W-890Rmkii; Connections - Teac W-890RMKII Manual Del Usuario

Connections

L R R
REC PLAY
TAPE
CAUTION
o Plug the power cord into an AC outlet only after having made all
other connections.
o Read the instructions of each component you intend to use with
this unit.
LINE IN and LINE OUT jacks
1
LINE IN:
Connect these to the LINE OUT jacks of the amplifier or the output
jacks of the CD player or other device.
LINE OUT:
Connect these to the TAPE/MD/CD-R, AUX or other input jacks of
the amplifier.
Refer to the above connection diagram.
NOTE
Plugs must be firmly inserted into the corresponding jacks. Do not
bundle the RCA cables together with the power cord and speaker
cables. Doing so will degrade sound quality or generate noise.
2 VOLTAGE SELECTOR
Switches the voltage to either 230 V or 120 V.
NOTE
o The voltage selector is not available on units for some
markets.
IN USA/CANADA
USE ONLY ON 120V SUPPLY
8

Features of the W-890RMKII

1
L
Ampli er
2
3 AC power cord
Plug this AC power cord into an AC wall socket.
NOTE
o Hold the power plug when plugging or unplugging the power
cord. Never pull or yank on the power cord.
o Unplug the power cord when you are not going to use the unit for
some time.
3