Installation Instructions - GE JVX3240SJSS Manual Del Propietario E Instalación

8 FOR VENTED INSTALLATIONS
On Some Models:
Remove recirculation component.
Install with vented mode deflector part.
On Some Models:
Install vented mode deflector part.
49-80783-1

Installation Instructions

9 FEED IN WIRES
Lift the hood into position and feed the house
wiring through the wiring knockout.
10 MOUNT THE UTC
Place the hood onto the partially installed
screws using the keyholes and slide the hood
back into position.
2
1
11 SECURE HOOD
Tighten the mounting screws. Be sure the
screw heads are in the narrow neck of the
keyhole slot.
Mounting
screw (4)
Keyhole (4)
17