Argos Technologies StarFire XT Manual Del Operador página 12

Argos Technologies StarFire XT — Operator's Manual
Getting Started
CAUTION
STOP
When changing the gas adapter ensure the device is switched off and disconnected
from the mains supply, and the gas supply is shut off.
Connecting the gas cartridge
WARNING
To operate the StarFire XT using a gas cartridge, the P nozzle must be used in the
burner head. Only use gas cartridges between ambient temperatures of 15-35°C.
The CV 360 cartridge is connected as follows:
CAUTION
Care must be taken not to dislodge the gas canister during use.
(cont.)
• To remove the adapter, use a pointed
tool, such as a ball point pen, to press
the adapter release button on the
underside (1) of the device and pull the
adapter away from the device (2)
• Insert the new adapter into the gas
adapter opening until it clicks into
position.
• Insert the gas cartridge adapter in the
adapter opening until you hear a "click"
• Insert the gas cartridge into the cap
until it audibly clicks into position
• The gas cartridge is now inserted
• Turn the black knob fully in the "ON"
direction to allow the gas to flow.
• The flame can be ignited using any of
the two operating modes with the gas
canister connected.
• Verify that there are no leaks prior to
engaging flame.
11