Important Safety Information - Argos Technologies StarFire XT Manual Del Operador

Important Safety Information

StarFire XT is an automatic Bunsen burner that can be used to heat or sterilize samples,
flasks or other laboratory materials. Unlike traditional Bunsen burners, StarFire XT is
not intended for continuous heating applications.
Always use this product in accordance with these instructions. Where appropriate,
safety goggles and protective clothing may be required for your safety.
Safety Features of StarFire XT
• If the flame is not ignited within 5 seconds, the flame detection will shut off the
gas supply.
• If the temperature exceeds the safe operating level the gas supply to the unit is
automatically shut off.
Using StarFire XT
StarFire XT has been designed to incorporate several safety features that comply with
industry recognized safety standards. The unit should only be operated by trained
personnel following the operating instructions detailed in this manual.
StarFire XT should never be used in disrepair or operated by untrained personnel.
Doing so may result in potential safety risks to the laboratory.
To ensure the safe operation of the StarFire XT, all personnel that operate the burner
must have read and understood the manual. Should you have any questions regarding
its operation please contact our Technical Support department prior to operation.
Contact your local safety officer if you have any questions about local or corporate
regulations and guidelines related to the safe operation of our instrument.
Argos Technologies StarFire XT — Operator's Manual
4