Menu Functions - Argos Technologies StarFire XT Manual Del Operador

Argos Technologies StarFire XT — Operator's Manual
Switching StarFire XT on and off
• Briefly pressing the MENU button will switch StarFire XT on.
• StarFire XT can be switched off by pressing the MENU button for at least 2 seconds.
• If StarFire XT has not been used for 15 minutes it will switch off automatically to
conserve energy. If desired this can be changed in the settings.
• When StarFire XT is switched on for the
first time a screen will come up asking the
desired language. Use the MENU KNOB to
scroll through the options then press MENU
BUTTON to select. StarFire XT will use this
language unless changed in the SETTINGS menu or the device is reset.

Menu Functions

Rotate the MENU KNOB to scroll through the different operating modes. Select mode
by pushing the knob briefly.
In several operating modes, pressing the
MENU BUTTON will display adjustable
parameters on a black background. These can
be changed by rotating the MENU KNOB and
confirmed by pressing briefly.
SENSOR operating mode
In SENSOR operating mode, the flame is ignited when an object is passed in front of the
sensor window at a distance less than 5 cm.
CAUTION
For safety reasons, it is highly recommended the SENSOR ACTIVATION is left at
x2 (see "Adjusting the system parameters" on page 15). This will mean that the flame
is only ignited when an object passes in front of the sensor twice is quick succession,
meaning that accidental ignition is extremely unlikely.
An object passing in front of the
sensor will ignite the flame
Pressing the MENU BUTTON will
ignite the flame
Pressing the optional footswitch will
ignite the flame
Change the general setting
parameters
13