Cerwin-Vega XD3 Manual De Instrucciones página 3

CAUTION TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT FULLY
INSERT.
The unit and power supply should only be connected to a power supply outlet only of the voltage and
frequency marked on its casing.
1. Protect the power cable from being walked on or pinched particularly at plugs, convenience
receptacles, and the point where they exit from the apparatus.
2. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two
blades with one wider than the other. A grounding type plug has two blades and a third grounding
prong. The wide blade or the third prong is provided for your safety. If the provided plug does not fit
into your outlet, consult a qualified electrician for replacement of the obsolete outlet.
3. If the mains plug supplying this product incorporates a fuse then it should only be replaced with a
fuse of identical or lower rupture value.
4. Never use a damaged or frayed power cable; this can introduce serious risk of exposing lethal
voltages.
5. The power supply cable of the unit should be unplugged from the wall outlet when it is to be unused
for a long period of time.
6. Only use attachments/accessories specified by the manufacturer.
DO NOT ATTEMPT SERVICING OF THIS UNIT YOURSELF. REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
Upon completion of any servicing or repairs, request the assurance that only Factory Authorized
Replacement Parts with the same characteristics as the original parts have been used, and that the routine
safety checks have been performed to guarantee that the equipment is in safe operating condition.
REPLACEMENT WITH UNAUTHORIZED PARTS MAY RESULT IN FIRE, ELECTRIC SHOCK OR
OTHER HAZARDS.
Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been
damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have
fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally,
or has been dropped.
Apparatus shall not be exposed to dripping or splashing liquids and no objects filled with liquids, shall not be
placed on the apparatus.
Where the MAINS plug or an appliance coupler is used as the disconnect device, the disconnect device shall
remain readily operable.
NOTE: Unplug the unit from the wall outlet before cleaning. Never use benzene, thinner or other solvents
for cleaning. Use only a soft damp cloth.
NOTE: Care should be taken so that objects do not fall, and liquids are not spilled into the enclosure
through any openings.
If an indoor antenna is used (either built into the set or installed separately), never allow any part of the
antenna to touch the metal parts of other electrical appliances such as a lamp, TV set etc.
CAUTION – POWER LINES
Any outdoor antenna must be located away from all power lines.
2