Steren RM-950 Manual De Instrucciones página 2

AUTOMATIC DOOR
OPENER
User Manual
PLACEMENT AND REPLACE THE BATTERY
PAIRING WITH A MULTIFUNCTION CONTROL
Before to make the pairing, ensure that the door's control is compatible with the
Security+ technology or with the same operation frequency of the RM-950 control.
®
1. Press the button of the RM-950 and
the LIGHT button in the control of the
door, simultaneously.
2. Keep pressing the two buttons and
press at the same time the button in the
remote control of the door.
3. When the LED indicators in the motor
of the door flashes or you hear two clicks
(after 3 seconds approx), release all
buttons.
Do not open the door while you
programming the control.
V0.0/0817v
Remove the clip and use it to open the
remote control carefully. Place or replace
the battery for one of the same features.
(CR2032).
Ensure that place it with the correct
polarity.
Before to use the product, please read carefully this manual to avoid any malfunction.
The info in this manual is shown as reference. Due to updates can exist differences. Consult
our website www.steren.com to obtain the current version of this manual.
• This product is NOT a toy; keep it away from children.
• Don't obstacle the door's trajectory.
• Always pay attention when you do use the control.
• Any reparation not authorized may cause malfunction and avoid the warranty.
Before to make the pairing, ensure that the door's control is compatible with the
Security+ technology or with the same operation frequency of the RM-950 control.
®
1. Open the door's remote control.
2. Press the button of the RM-950 and
the A and B buttons in the control of the
door, simultaneously.
3. When the LED indicators in the motor
of the door flashes or you hear two clicks,
release all buttons.
HOW TO UNPAIR THE CONTROL
Press and hold the "Learn" button in the motor of
the door until the indicator LED light off.
SPECIFICATIONS
Input: 3 V - - - (1 x CR2032)
Operating frequency: 315 MHz
Due to the motors for doors are different, the configuration process may vary. If you experiment some troubles with the pairing, please refers to the
user manual of the motor to know how to pair a new control.
Specifications may change without notice
CAUTIONS
PAIRING
"A"
"B"