Install Duct Covers; Complete Installation; Range Hood Use; Range Hood Description - Samsung NK30K7000WS/A2 Guía De Instrucciones Para Instalación

Installation
Installing the duct covers
When using both upper and lower vent covers, push the lower cover
down onto hood and lift the upper cover to the ceiling and install with two
mounting screws.
NOTE
The upper vent cover may be reversed to hide the slots.
A
B
A. Upper vent cover
B. Lower vent cover
C. 4.2 x 8 mm screws

Range Hood Use

Range Hood Description

The range hood is designed to remove smoke, cooking vapors, and odors from the cooktop area. For best results, start the hood before cooking and
allow it to operate several minutes after cooking is complete to clear all smoke and odors from the kitchen. The hood controls are located on the front
side.
C
D
C
D. Bracket
C
D
A
Secure the bottom of the duct with 2 - 4 x 8 mm screws.

Completing the Installation

For non-vented (recirculating) installations only.
Install charcoal filters over the blower grids. See the "Range Hood Care"
Section.
1. Install the metal baffle filters. See the "Range Hood Care" section.
2. Check the operation of the range hood blower and light.
See the "Range Hood Use" section.
NOTE
To get the most efficient use from your new range hood, read the "Range
Hood Use" section.

Charcoal Filter

If the model is not vented to the outside, the air will be recirculated
through disposable charcoal filters that help remove smoke and odors.
The charcoal filters are clipped on the motor housing frame.
NOTE
To Reduce the Risk of Fire and Shock use only the charcoal filter
NK-AR050FNB/AA.
Charcoal filters are not included with the hood.
They must be ordered from your supplier or Samsung service center.
Order the needed kit specifying your hood model and width size.
B
A. Baffle filter
B. Baffle filter handle
C. Blower and light controls
D. LED lamps
English 9