Uninstalling Metal Grease Filter; Installing Metal Grease Filter; Changing The Activated Charcoal Filter (Only In Circulating-Air Mode) - Bosch HUI50351UC Manual De Uso Y Cuidado

Uninstalling metal grease filter

Pulling out the filter drawer.
1.
Press the two locks at the same time.
2.
While doing this, fasten the metal grease filters with
your hands.
Note: To avoid causing damage, do not bend the
metal grease filters.
Take the metal grease filters out of the holder.
3.
Note: Grease can accumulate in the bottom of the
metal grease filters. Hold the metal grease filters level
to prevent fat from dripping out.
After removing the metal grease filters, clean the
4.
inside of the appliance.
Clean the metal grease filters and let them dry before
5.
re-fitting.

Installing metal grease filter

Insert metal grease filter.
1.
Simultaneously use your other hand to grasp under
the metal grease filter.
Flip metal grease filter up and snap the latch into
2.
place.
Changing the activated charcoal filter
(only in circulating-air mode)
In order to guarantee effective odor removal, the filters
must be maintained regularly.
The activated charcoal filters must be changed at least
every 4 months.
Notes
The activated charcoal filters are an optional
▯
accessory. The activated charcoal filters are available
for purchase from specialist retailers, from customer
service or from the Online Shop.
The activated charcoal filters cannot be cleaned or
▯
activated again.
Remove the metal grease filter.
1.
Turn the old activated charcoal filters and pull away
2.
from the holder.
¨
Push the new activated charcoal filters onto the holder
3.
and turn.
©
Install the metal grease filters.
4.
11