Technical Data - PeakTech 3355 Manual De Instrucciones

CAUTION!
Note on using the supplied safety test leads according the
IEC / EN 61010-031:2008:
Measurements in the field of overvoltage category CAT I or CAT II
can be performed with test leads without sleeves with a maximum
of up to 18mm long, touchable metallic probe, whereas for
measurements in the field of overvoltage category CAT III or CAT
IV test leads with put on sleeves, printed with CAT III and CAT IV
must be used, and therefore the touchable and conductive part of
the probes have only max. 4mm of length.
CAUTION !
This CAUTION symbol indicates a potentially hazardous situation,
which if not avoided, may result in minor or moderate injury, or
damage to the product or other property.

2. Technical Data

2.1. Specifications
Display
Overrange indicaton:
Low battery indication:
Measuring rate:
P 3355
26 mm , 3 ¾ digit, 4000 counts with
automatic polarity
backlight
P 3360
19 mm, 4 ¾ digit, 40000 county with
automatic polarity indication, backlight
and 42 segment bargraph
"OL"
Battery symbol indicates low battery
condition (P 3360)
2 times / sec.
-38-
indication and