Connecting Straps - beautyrest Advanced Motion Base Manual Del Proprietário

connecting straps (optional)
If any split setup is being installed, plastic connecting straps are provided (one per base) to secure the bases
together. Use both straps to secure the head and foot portions together.
STEP 1
With the bases in their desired location, slightly loosen both
legs to allow the strap to fit on the leg bolt, between the leg
washer and frame.
14
STEP 2
Slide side (a) of the connecting strap onto leg bolt. Swing the
strap and connect side (b) to the leg bolt. Secure the strap by
shifting to the left.
a
STEP 3
Re-tighten legs. Do not over tighten. Use the remaining
strap and repeat on other end of the base.
b