Change Saw Blade - Holzmann KAP 255XJL Manual De Instrucciones

14.2

Change saw blade

In the following causes the blade to be changed:
 You need to change to a different type of blade for better cutting result.
 You replace a worn saw blade by a new one
ATTENTION: Use only saw blades with
 max. diameter Ø of 305mm
 max. thickness of 3mm
 25.4 mm inner diameter
 max. RPM of the saw blade must be at least 6000rpm.
 Blade quality HSS or better
CAUTION:
To eliminate the risk of cutting oneself, you should wear when handling the saw blade gloves!
 Swivel the movable circular saw blade guard (6) upwards.
 Press the spindle lock button (17) slightly and rotate the blade to the spindle lock engages.
 With the Allen key (31) to solve for the flange bolt by turning it clockwise.
CAUTION:
Left-hand thread !
 Remove the flange bolt and flange.
 Remove the blade from the motor shaft.
 Install the new blade onto the spindle and pay attention to the right direction.
 Put on the flange and tighten the flange screw with the Allen key (31) counterclockwise fixed.
- Left hand thread -
For Precision miter saw blades are recommended with teeth 60T!
HOLZMANN Maschinen GmbH www.holzmann-maschinen.at
Zug-, Kapp-, Gehrungssäge / Profi mitre saw / Manual de instrucciones/Mode d´emploi
MAINTENANCE
Seite 37
KAP 255 XJL