Change The Carbon Brush; Change The Batterie; Storage; Disposal - Holzmann KAP 255XJL Manual De Instrucciones

14.3

Change the carbon brush

If your HOLZMANN KAP 255XJL motor becomes loud or even does not start anymore, the carbon
brushes are probably worn.
Remove with a screwdriver the carbon brush cover. If the carbon brush is worn (<4mm) you
need to replace the 2 carbon brushes.
Memorize the direction of the carbon brushes when removing
them. Take care to insert the new brushes similarly.
Run the saw for 10 minutes in idle run. Release the accelerator
lever and observe the time interval required for the saw blade to
stop. If it takes long time to stop (~ 20 seconds), then the elec-
tric saw blade brake does not work. Let the saw be checked by a professional.
14.1

Change the batterie

Open the cover of the battery compartment and 2 extra batteries
(AAA) insert.
14.2

Storage

Never store outdoors!
Storage temperatures should be between +5°C and + 40°C. Store at a dry and tidy place.
14.3

Disposal

Do not dispose your KAP 255XJL with domestic waste. Inform yourself at your local
authorities about the available possibilities of proper disposal of machinery.
In many countries your reseller is obliged to take back your old machine for disposal
if you buy a new machine with similar function at his shop.
HOLZMANN Maschinen GmbH www.holzmann-maschinen.at
Zug-, Kapp-, Gehrungssäge / Profi mitre saw / Manual de instrucciones/Mode d´emploi
MAINTENANCE
Seite 38
KAP 255 XJL