MINOX DTC 550 WiFi Manual De Instrucciones página 35


Acoustic signal: Off, On
Select "On" to activate the button sounds, and "Off" to deactivate them.

Automatic deactivation: Off, 3, 5, 10 minutes
Select when the wildlife camera should automatically turn off while in SETUP mode. If none of the control buttons are
pressed within the specified time, the wildlife camera will switch off. Push the OK button to reactivate the camera.

Illumination duration: Off, 1, 3, 5 minutes
Select when the display should automatically switch off while the wildlife camera is in SETUP mode. If none of the
control buttons are pressed within the specified time, the display will switch off. Push any button to reactivate the
camera.

IR light: Automatic, high, low: The IR illumination depends on the existing voltage of the batteries. If the batteries are
full, the IR LEDs light up at full power. When the voltage of the batteries decreases, the power of the IR LEDs is halved
in order to provide longer operation of the wildlife camera.
High: The IR LEDS always light up at full intensity.
Low: The IR-LEDs always light up a half intensity.

Timer: Off, On
Set the timer to "On" to activate the wildlife camera during a certain period of time. You can specify two time periods
that should not overlap.
After the timer has been activated, the following options are available: "Start 1", "Start 2", "Stop 1" and "Stop 2". If
two time periods overlap, the earliest start time and the latest stop time will apply.

Start 1/Stop 1 and Start 2/Stop 2*: As soon as you have activated the timer function, you can set two start and stop
times – these should not overlap. If, for example, the Start 1 has been set to 18:35 and the Stop 1 has been set to
21:25, the wildlife camera will be active from 18:35 until 21:25. If you additionally set Start 2 to 23:00 and Stop 2 to
06:00, the camera will then reactivate on the same day at 23:00 and will continue operation until 06:00 on the next
day. Outside of these preset time periods, the wildlife camera will not take any photos or record any videos.
*This option is only available if the timer function has been activated.

Date and time: Set the date and time. The date will be displayed in the following format: "YYYYMMDD".
Using the and buttons, change to the values to be set and with the
values. Confirm using the OK button.

Time format: 12 hours, 24 hours
If set to the 12-hour format, the times before noon will be displayed with AM and afternoon to evening times with
PM.

Time stamp: Off, On
Select "On" if the date, time, temperature and moon phase should be displayed in the photos. Otherwise, select
"Off". The time stamp can also be displayed on videos.

Camera name: To identify a specific camera, you can give it a name. Use the
13 positions where a character should appear and the
the camera name.

Camera password: Off, Ein
Select "On" if you wish to protect your camera from unauthorized access. Enter a four-digit password. Select Off to
deactivate this function. This password will now be requested every time you turn on the camera and are in Test
Mode. If you have forgotten your password, you will be unable to use the trail camera. To unlock the camera, send
the camera to our service with your proof of purchase.

Activate the WiFi: Off, On
Select "On" if you wish to connect the MINOX WiFi Wildlife Camera app with your device. This will activate the WiFi
function on your wildlife camera. After you have selected "On", the current WiFi password will be displayed. You now
have the option to keep this password or to create a new one. Please note that you can create a password with up to
eight characters (capital letters and/or digits from 0-9, e.g. "BERLIN87"). Make sure to note the password down. You
will need this later when connecting your app to the camera.

Language: English, German, Spanish, Dutch, French, Polish, Danish, Italian, Hungarian, Slovenian, Mandarin Chinese,
Traditional Chinese, Japanese.
Set the desired language for the menu.

Format card: No, Yes
Select "Yes" if you wish to format your memory card. Warning: When formatting, all data on the memory card will be
irretrievably deleted! You will not be prompted to confirm before deleting.

Factory setting: No, Yes
Reset all of your settings. All previously made settings will be lost.
and buttons, select the desired
and
and buttons to select the desired numeral or letter for
buttons to select one of the
35