MINOX DTC 550 WiFi Manual De Instrucciones página 42

Save your changes and entries with the "Save" button or cancel the process with "Back".
Firmware
WiFi
Information about the current WiFi firmware in your camera. Updating is not possible via the app. If important updates are
provided by the manufacturer, you will be notified via the app.
Camera
Information about the current WiFi firmware in your camera. Updating is only possible directly via the camera. If important
updates are provided by the manufacturer, you will be notified via the app and the manufacturer's homepage
(www.minox.com). To leave this page tap on "Back".
Delete camera
Use this function to delete the currently connected wildlife camera from the app. To access this camera again, you must
reconnect the camera to the app. See "Setting up a wildlife camera in the app".
Disconnect camera
Use the "Disconnect camera" feature to send any changes made within the app's settings menu to the camera. The new
settings are applied and the WiFi connection to the phone is terminated. Changes are also automatically submitted and
applied 3 minutes after you close the app.
Accessing a previously installed camera in the app
After you have set up the wildlife camera and installed it at its location, you will want to access the camera after a certain
period of time to view the photos or videos, or to change the settings of the camera. Proceed as follows.

Move within a maximum radius of 10 meters from the camera. Activate the Bluetooth and WLAN settings on your
smartphone.

Open the app. After the start screen, you are will now see the selection window listing all of the connected cameras.
Tap on the camera you wish to access.

The Bluetooth connection between the camera and the smartphone will be automatically established. After the
connection has been completed, the WIFI setup wizard will open.

Click on "Device settings" and connect your phone to the camera's WiFi network (the network name is the same as the
camera name). This procedure refers to setting up the camera using an iOS operating system. With an Android system,
the smartphone will automatically connect to the camera's WiFi network.

Go back to the app. The options screen will open automatically. You now have access to the "Overview", "Media",
"Settings" and "Disconnect camera" options and can view the status of the camera, transfer or delete your photos or
videos to your phone, or change and transfer camera settings to the camera.
42