Demolition And Disposal - Piusi MA 130 Instrucciones De Uso Y Mantenimiento

S DECOMISSIONING
Should the pump remain inactive for long periods, proceed as follows
WARNING
1. Wash internally using products suitable for to the fluid being pumped.
2. Close the fluid intake and delivery valves mounted on the pump.
3. Close the air supply using the three-way valve; this will discharge any residual
pressure.
4. If you want to store the pump in the warehouse, you must respect the following:
WARNING
5. If the pump was in disuse for a long period of time, circulate clean water through
it for some minutes before restarting it to avoid incrustations.
T

DEMOLITION AND DISPOSAL

The Piusi MA and Piusi MP pump does not contain dangerous parts; however, when
they are worn out, they must be disposed of in the following manner.
WARNING
1. Disconnect pneumatic supply from pump.
2. Disassemble and remove the pump from its position.
3. Separate elements according to type (see the pump's composition codes).
WARNING
Discharge any residual fluid from the pump. In case
of dangerous, toxic fluids and/or otherwise noxious
products, wash and treat as suitable:danger of
injuries, damage to health and/or death.
Storage must be in a closed and protected environ-
ment at temperatures ranging from 5 to 45°C, and
a humidity level not above 90%.
discharge any residual fluid from the pump. In case
of dangerous, toxic fluids and/or otherwise noxious
products, wash and treat as suitable: danger of
injuries, damage to health and/or death.
for disposal please contact specialized disposal
businesses and make sure that no small or large
components are dispersed in the environment
which may cause pollution, accidents or direct and/
or indirect damage.
69/208
EN