Features
Top Panel
16
16
14
14
13
13
18
18
19
19
23
23
15
15
25
25
29
29
1.
Browser Knob: Rotate this knob to cycle through folders and tracks. Press the Knob To
cycle between the Crates and Library.
2.
Master Gain: Adjusts the master volume in the software.
Note: This control does not affect the microphone volume which is summed with the final
output of the Master Gain to the Master Output. Use the Mic Gain knob to control the
microphone volume.
3.
Cue Mix: Adjusts the software's audio output to the headphones, mixing between the
cue output and the master mix output.
4.
Cue Gain: Adjusts the volume for headphone cueing in the software.
5.
Load: Press one of these buttons while a track is selected to assign it to Deck 1 and 2,
respectively, in the software.
6.
High EQ: Controls the treble frequencies for the individual channels.
7.
Mid EQ: Controls the mid range frequencies for the individual channels.
8.
Low EQ: Controls the bass frequencies for the individual channels.
9.
Filter: Adjusts the amount of the filter effect. Turning the knob left and right will produce a
Low Pass Filter or High Pass Filter.
10. Cue/PFL: Sends pre-fader audio to the Cue Channel for headphone monitoring.
11. Channel Volume: Adjusts the volume of the individual channels in the software.
12. Crossfader: Controls the blend between the two decks.
13. Pitch Bend Down: Press and hold to momentarily reduce the speed of the track.
14. Pitch Bend Up: Press and hold to momentarily increase the speed of the track.
15. Pitch Fader: This controls the speed of the music. Moving towards the "+" will speed the
music up, while moving towards the "–" will slow it down.
16. Touch Strip: Use the Touch Strip to adjust the assigned FX. Hold Shift + Strip Search to
search through a track's time.
4
17
17
6
20
20
21
21
7
22
22
8
9
10
10
24
24
11
11
26
26
27
27
28
28
6
1
5
5
7
2
8
3
22
22
9
4
10
10
24
24
11
11
30
30
27
27
12
12
28
28
16
16
19
19
18
18
20
20
23
23
26
26
29
29
13
13
17
17
14
14
21
21
15
15
25
25