ProMinent DULCOMETER D2C Instrucciones De Servicio página 34

Maintenance / Repair
Fuse change D2C W:
• The above-specified safety measures must be implemented (disconnection from mains!) before
replacing the device fuse:
The mains power fuse is located in a closed fuse holder (6) in the terminal box.
• Open device and set in "park position"
• Release bayonet catches of fuse holder
• Remove fuse and replace by new fuse
• Lock bayonet catch and close housing
Upper section of housing
Item (1) Electrical assembly, display
Item (2) Ribbon cable
Item (3) Electrical assembly I/O/S
34
inside
1
2
Lower section of housing
inside
4 3
......
D1C-..
FW-_._
Item (4) Ribbon cable
Item (5) Electrical assembly, processor
Item (6) Fuse holder
Sectional
side view
5 6
DED1C1W010