Toto TB960S Manual De Instrucciones página 4

Installing the Lever Handle
1. Dissemble spindle from
lever handle by removing
set screw and unscrewing
spindle.
2. Thread the decorative cap
onto the threaded collar.
3. Slide the spindle onto the
decorative cap.
4. Secure the spindle with
screw.
5. Align index marking of
handle at off position.
6. Slide the lever handle onto
the assembly.
7. Secure the lever handle
with setscrew.
Installing the Diverter Unit (TS960S)
1. Unscrew the diverter knob
setscrew.
2. Thread the mounting nut
with foam gasket onto the
threaded adapter.
3. Slide the diverter knob onto
the mounting nut.
4. Install knob direction
according to rough-in.
5. Secure the diverter knob
with setscrew.
INSTALLATION PROCEDURE
Decorative cap
Diverter knob
4
Threaded collar
Threaded adapter
Spout
Hands hower
Lever handle
Setscrew
Spindle
Setscrew
Mounting nut