Technical Data; Summary Description - Aquatec FORTUNA AQT00042 Instrucciones De Manejo

3.3 Technical data

Bathlift
Seat length:
Seat width with folded out
sideflaps:
Seat width with folded up
sideflaps:
Seat height at lowest
position:
Seat height at highest
position:
Seat depth from the lower
edge of the backrest
to the seat edge:
Backrest height:
Backrest width:
Max. load capacity:
Total weight without battery:
Weight of seat:
Weight of backrest:
Weight of battery:
Duration of lifting/lowering procedure
(with load of 80 kg):
Operating voltage:
Max. current consumption:
Rated input:
Noise emission of drive
without load
(according to DIN 3746):
Medical device of type B
Protection class:
Operating factor:
Battery:
Included fuse:
EN
635 mm
700 mm
380 mm
70 mm
420 mm
460 mm
613 mm
360 mm
120 kg
12.4 kg
7.9 kg
4.5 kg
1.6 kg
UP approx. 44 sec.
DOWN approx. 34 sec.
12 V
12 A
100 VA
47 dB (A)
IP 54
5 %
12 V/lead
5 A (slow-blow)
Charger
Input:
Input (USA and CDN):
Output:
Weight:
Recharging period from
low-voltage alarm:
The type plate of the AQUATEC FORTUNA
(figure 15) shows the main device specifica-
tions.
It is mounted at the rear of the backrest.

3.4 Summary description

The main components of the AQUATEC
FORTUNA are made from robust plastic
materials. The sliding rails, the lifting scissors
and the spindles are in stainless steel.
To facilitate handling, the backrest can be
easily removed from the seat.
The seat and backrest are equipped with
latex-free covers. Do not use the AQUATEC
FORTUNA without covers at the seat and
backrest.
The covers can be removed for cleaning.
The hand control is waterproof and floats on
water. It contains all operating elements and
a display showing the battery charge level.
The charger is only suitable for connection to
the mains specified on the device. During
recharging, an indicator lamp mounted on the
charger is continuously on.
230 V AC, 50/60 Hz,
55 mA/10.5 W
120 V AC, 50/60 Hz,
55 mA/10.5 W
12 V DC, 400 mA/4.8 VA
0.5 kg
approx. 5 h
25