Maintenance; Changing The Battery; Cleaning; Storage - AEMC Instruments CA7024 Manual De Instrucciones

Use only factory specified replacement parts. AEMC
responsible for any accident, incident, or malfunction following a repair
done other than by its service center or by an approved repair center.
5.1

Changing the Battery

Disconnect the instrument from any cable or network link.
1. Turn the instrument OFF.
2. Loosen the 2 screws and remove the battery compartment cover.
3. Replace the batteries with 4 x 1.5V AA alkaline batteries, observing
the polarities.
4. Reattach the battery compartment cover.
5.2

Cleaning

Disconnect the instrument from any source of electricity.
• Use a soft cloth lightly dampened with soapy water.
• Rinse with a damp cloth and then dry with a dry cloth.
• Do not splash water directly on the instrument.
• Do not use alcohol, solvents or hydrocarbons.
5.3

Storage

If the instrument is not used for a period of more than 60 days, it is recom-
mended to remove the batteries and store them separately.
Fault Mapper Model CA7024
CHAPTER 5

MAINTENANCE

will not be held
®
17