AUtec Modular Serie Manual De Usuario página 30

LIMKDPU0
MK10 DF OPERATION TRANSCEIVING UNIT
POWER AND STARTING
1 To switch on the transceiving unit, insert
the starting key and turn it to "I".
2 To start the radio remote control functions,
press the "START" button for 1÷2
seconds.
After starting, the green signalling LED
always lights up.
1
TYPE OF SIGNAL
blinking green LED
blinking red LED, accompanied
by intermittent sounds from the
buzzer
steady red LED at starting,
accompanied by the continuous
sound from the buzzer
6
2
SIGNALS
MEANING OF
SIGNAL
OPERATION
NORMAL
LOW BATTERY
The transceiving unit switches
off 3 and half minutes after the
LED starts flashing
ONE OR MORE (movement)
ACTUATORS and/or STOP
PUSHBUTTON INSERTED
COMMAND
ACTIVATION
Operate the actuators
and/or the selectors
relevant to whatever
movement or selection
command is to be
carried out.
ACTION
NECESSARY
///
Switch off the
transmitting unit and
replace the battery
Release actuator(s)
Page 10