JVC KW-NT500HDT Manual De Instrucciones página 60

SD/USB operations
Caution:
USB
• Do not connect 2 or more USB hubs to the USB cable of the unit.
• If you connect a USB device with large consumption current to the USB hub, it may not operate. In this case,
connect the device directly to the USB cable.
• When connecting via a USB hub, connect the USB hub to the USB cable first, then connect the USB device to
the USB hub.
• Avoid using the USB device if it might hinder your safety driving.
• Disconnect a USB device while playback is paused or another source is selected.
• Electrostatic shock at connecting a USB device may cause abnormal playback of the device. In this case,
disconnect the USB device. Turn off the unit, then turn on again.
• Do not leave a USB device in the car, expose to direct sunlight, or high temperature to avoid deformation or
cause damages to the device.
• You can connect USB devices and iPod/iPhone to the same USB hub.
• This unit cannot recognize a USB device whose rating is other than 5 V and exceeds 1 A.
• USB devices equipped with special functions such as data security functions cannot be used with the unit.
• Depending on the shape of the USB devices and connection ports, some USB devices may not be attached
properly or the connection might be loose.
• This unit may be unable to play back some USB devices or some files due to their characteristics or recording
conditions.
• While playing from a USB device, the playback order may differ from other players.
• This unit may be unable to play back some USB devices or some files due to their characteristics or recording
conditions.
• This unit may not play back files in a USB device properly when using a USB extension cord.
• This unit cannot assure proper functions or supply power to all types of the devices.
SD
• This unit can play back microSD or microSDHC.
USB USB
USB USB
HUB
USB
HUB
HUB
60
USB
USB
USB
U USB