Safety Instructions; Intended Use - Parkside KH 4125 Instrucciones De Uso

Safety instructions

To avoid the risk of accidents:
• Only operate the pump when it is effectively secured against twisting,
wrenching or canting by correct use of the supplied mounting.
• Check the pump for faultless service-ability before every utilisation. The
pump may not be used if it shows signs of damage.
• Use only hoses certified as being able to withstand a pressure of at
least 3 bars (44 psi).
• Check the plug-in connectors on the hoses for firm seating.
• Ensure that fluids cannot come close to the electric drill being used to
drive the pump. Should it nonetheless occur, immediately remove the
power plug.
• This device is not suitable for children or for people whose physical,
sensorial or intellectual faculties prevent the safe usage of the appliance
without support or supervision. Children should be supervised to ensure
that they do not play with the appliance.

Intended use

This pump is intended for ...
– standard electric drills with a 43 mm spindle shaft and scroll chuck and
a rotation speed of up to 3,400 rpm,
– for the pumping of cold or up to 40° C warm fluids, as in the draining
or transfer of water in aquariums, ponds or large containers/barrels.
This pump is not intended ...
– for the pumping of inflammable, explosive, poisonous or caustic fluids or
foodstuffs.
- 18 -