CRB INDUSTRIES manufacturing
CRB Industries' Chemistry & Proper Application
CARPET CLEANING MACHINE TM4 / TM5
Ultra Pro Encap Peroxide:
Pre-spray:
Medium soil.....4-6 oz. per gallon water
Heavy soil.......10-12 oz. per gallon water
Spot Cleaning:
Dilute..............32 oz. per gallon water
Extreme restorative cleaning 14 -18 ounces of concentrate per gallon of water.
Rinse Aid:
If a previously cleaned carpet has a sticky residue, pre-spray mixed at 2 oz. per gallon of
water in extractor tank.
Enzyme Pre Spray Extraction:
Pre-spray:
Medium soil..... 10 oz. per gallon water
Heavy soil.......16 oz. per gallon water
Spot Cleaning:
Straight
Rinse Aid:
If a previously cleaned carpet has a sticky residue, pre-spray mixed at 2 oz. per gallon of
water in extractor tank.
Enzyme Spotter:
Do not dilute. For heavily soiled areas, remove gross filth first. Apply Enzyme Spotter to an
areas about twice as large as the visible stain. Use a spotting brush to gently work spotter
into the area and wait at least 2 minutes. Blot or extract area to remove visible stains. For
urine or other foul odors, reapply the Enzyme Spotter to the area, work in with the spotting
brush, and allow to air dry. If possible, cover the area with a moist white towel for several
hours.
Beverage Spotter:
Do not dilute. Apply Beverage Spotter RTU to stain area. Use a spotting brush or bone
scraper to gently work the spotter into the stain area. Wait at least 2 minutes, then blot
with a white towel or extract the loosened stain out of the carpet. Do not oversaturate.
Dry area as quickly as possible. *Always test an inconspicuous spot before using on
upholstery.
Ultra Pro Organic Dry Compound:
An organic compound made from recycled materials meets the EPA/DfE standards and
provides cleaners with the ability to deep clean carpets with dry time in 40 minutes or less. It
is recommended for use on heavy traffic lanes and stains. For the most effective results, use
in conjunction with the Ultra Pro Encap 2 n 1 Pre Spray
Proper Application:
1. Apply a thin layer on the heavy traffic lanes and spots/stains immediately after the Ultra
Pro Encap was applied
2. Wait 2–3 minutes for it to set in
3. Agitate thoroughly with the CRB machine
4. Wait 20–30 minutes for the agitated product to dry
5. Attach the collection trays (Renovators) to the CRB and recover the dried and
encapped soil
Low Moisture:
Medium soil.....4 oz. per gallon water
Heavy soil......12 oz. per gallon water
Extraction:
Dilute ............2-3 oz. per gallon water
Low Moisture:
Medium soil.....4 oz. per gallon water
Heavy soil......12 oz. per gallon water
Extraction:
Dilute ............2-3 oz. per gallon water
Instructions manual
16