Basic Playback; Playing A Usb Device - Onkyo TX-SR252 Guia De Inicio Rapido

Playback

Basic Playback

c
1. Switch the input on the TV to that assigned to the
unit.
a
2. Press INPUT SELECTOR (a) on the remote
control with the same name as the jack to which
you connected the player to switch the input.
3. Start play on the player.
4. Use VOL34 (b) to adjust the volume.
0 You can switch the audio to suit the connected
cable. Press AUDIO SEL (c) to select H (HDMI
cable), C1 (coaxial cable), O1 (optical cable), or A
(analog audio cable).
b

Playing a USB Device

a
Play music files on a USB storage device. This unit
supports play of WMA/MP3/MPEG-4 AAC music
files.
b
0 Note that operation is not guaranteed with all USB
storage devices.
1. Switch the input on the TV to that assigned to the
c
unit.
2. Press USB (a).
3. Connect the USB storage device to the USB port
on the main unit.
0 Play of the first file starts automatically when the
USB storage device is detected.
4. To play another file, press RETURN (b) to display
the list of files and folders on the TV, then use the
cursors to select and ENTER to confirm (c).
0 If characters that cannot be read are recorded
on the USB file, they are replaced with
En
marks.
13