Injector Modules; Inserting An Injector Module; Removing An Injector Module - Miele professional A 315 Instrucciones De Manejo

en - Areas of application
Inserting an in-
jector module
Removing an in-
jector module
38

Injector modules

 Only ever place empty, unloaded modules in the baskets.
Check that they are correctly engaged before loading them.
Modules must be completely emptied before they are removed.
Placing loaded modules in baskets or removing them can cause
damage to the load items.
Only insert an injector module in the A 151 lower basket.
The triangular bracket secures the module to prevent it from moving

to the side. When inserting the module, make sure that the bracket
does not protrude beyond the edge of the lower basket .
Hook the module into the struts of the lower basket .

Then engage the front bracket of the module by pushing it into the

front cross strut of the basket .
Carefully push the basket into the cleaning machine to check that

the water connection is in the correct position.
 Do not hold the basket by the injector module when removing it
from the cleaning machine.
The module could come loose or the cleaning machine's water
connection could be damaged.
Release the module from the locking mechanism and lift it out of

the basket.